Learning Outcomes

Acting Forces

Power and Torque for Acceleration

Calculating for Force and Power

Drive Cycles

Lesson Summary

This module will discuss which physical forces act on a moving vehicle and how to perform calculations that will help determine the power required for an engine to overcome these forces. It will also explain how to calculate the amount of energy that will be consumed by an electric vehicle, depending on driving conditions, to establish design parameters for the electric vehicle.

The Vehicle Drive - Train

Batteries

This module will discuss the basic functions of the electric vehicle's subsystems, including an introduction to the very heart of the electric vehicle, the battery.

First Assessment

This assessment enables you to review your learning so you can determine your knowledge and understanding of Modules 1 and 2 from the following course: 

• Diploma in Electric Vehicle Technology

Battery Parameters

Lithium-Ion Batteries

Battery Indicators

Development of Battery Packs

Battery Costs

This module will discuss how to calculate battery parameters, such as battery life, range, and charging methods. It will also analyze the chemical makeup of different batteries and what to consider when designing a battery to meet certain requirements.

Introduction to Battery Pack Design

Mechanical Design

Thermal Design

Electrical Design

Battery Management System

This module will discuss how to design a reliable and safe battery pack. It will explain the different stages of the design, such as cell configuration, the structure of the pack, safety, and pack control. It will also analyze the mechanical, thermal, and electrical design of the battery pack and how to implement a good Battery Management System that will monitor the battery pack.

Second Assessment

This assessment enables you to review your learning so you can determine your knowledge and understanding of Modules 3 and 4 from the following course: 

• Diploma in Electric Vehicle Technology

Diploma in Electric Vehicle Technology - Assessment

In this free online course, learn the basics of designing an electric vehicle and the technologies that drive them.

Diploma in Electric Vehicle Technology

With the growing prices in fuel, electric vehicles are more popular than ever and with governments pushing car manufacturers to produce more electric vehicles,  so with newer technologies the future is in electronics. Learn about the fundamental principles of designing an electric vehicle as you begin your studies. If you are an automotive technician, mechanical or electrical engineer, or just a car enthusiast, this course is for you.

Several years ago, electric vehicles were seen as something that was far into the future. Today, technology has not only allowed us to make them, but they are safer, more reliable and more powerful than ever before. The biggest concern with electric vehicles is their having enough power and energy to journey from one place to another. How would one go about calculating such a feat? Matters to help calculate this include the vehicle’s weight, the passengers’ weight, road conditions, wind resistance and other forces that impact the vehicle’s performance, all of which are explored throughout this course. Understanding the physics of these forces will help you calculate the amount of torque and power an electric motor will need to overcome these forces and how much energy a battery needs to supply to achieve the power requirements specified for the vehicle.Then you will investigate a vehicle's drive train’s role, including motors, controllers, batteries and gears. These are the elements that power the performance of the vehicle. Of course, the heart of an electric vehicle is the battery. You will discover the chemical make-up of different types of batteries and special attention will be given to the chemistry and properties of lithium-ion batteries, which is the battery of choice for electric vehicles. Afterwards, you will learn about different battery parameters and indicators. You will determine how to calculate the battery capacity, the state of charge of the battery or the percentage of charge still left in a battery so that the vehicle can inform the user how many more kilometres the vehicle can travel before it needs to recharge.Finally, you will learn how to design a battery pack. You will explore the different types of battery cells and arrange them to form the battery pack. You will learn how to compute the amount of energy you can achieve by putting these cells together and how to build a strong and safe container for the cells. Electric Vehicles are the vehicles of the future. They are eco-friendly, less expensive to operate than conventional internal combustion vehicles and are more reliable. If you are in the automotive industry or are a mechanical or electrical engineer, or find yourself simply interested in learning how electric vehicles work, this course is for you. Enrol in this ‘Diploma in Electric Vehicle Technology’ course today and be part of an ever-changing future in this exciting field.

Coursera’s $100 Million Thesis: Andrew Ng Will Think of Something

6 Best Penetration Testing Courses in 2025

Scaler Academy’s Big Lie: How India’s EdTech Darling Inflated Revenue by 15x

30+ Holiday Discounts & Online Learning Deals

The Rise of AI Search: ChatGPT Surpasses DuckDuckGo, Threatens Bing

25 Resources to Learn Generative Engine Optimization in 2025

Harvard’s Intro to Python: Earn a Free Certificate

Udemy Q4 2025: First Profitable Year Ends in a Loss

Udemy is “Intentionally Reducing” the Business That Made It Famous. It’s Not Working.

10 Best Critical Thinking Courses for 2026: From Problems to Decisions

7 Best Free Haskell Courses for 2025

11 Best TypeScript Courses for 2025

Why Coursera Stock Dropped by 20%

BloomTech’s Downfall: A Long Time Coming

How GenAI Costs Sank Duolingo’s Stock 20% (A Non-AI Generated Analysis)

200+ Cursos Online da FGV com Certificado Gratuito

Aims & Objectives of ISO/IEC 17025:2017

Accrediting to ISO/IEC 17025:2017

Main Sections of ISO/IEC 17025:2017

This module presents the fundamental aspects of ISO/IEC 17025:2017 along with its aims and objectives. The module also explains different forms of standardized verbs used throughout the standard. Moreover, you will also learn the benefits of accrediting to ISO/IEC 17025. Lastly, an overview of the section's standard is also given.

General and Structural Guidelines for Laboratories

Resource Requirements for Testing Laboratories

Contracts, Validation, Sampling & Handling

Technical Records, Uncertainty, Results Validity, & Reports

In this module, you will encounter the essential requirements given in clauses 4, 5, 6, and 7 of ISO/IEC 17025;2017. However, the explanation of Clause 7 is provided till sub-clause - 7.8. Through this module, you will learn about the general, structural, resource, and process requirements of ISO/IEC 17025:2017.

Information Management, Complaints & Nonconformities (NCs)

Management System Requirements

Taking Corrective Actions

In this module, you will see discussions on ISO/IEC 17025:2017 beginning from sub clause 7.9 that puts forward the complaint requirements put forth by the standard. Furthermore, it presents the standard's requirements regarding management systems. Moreover, it also contains necessary measures to be taken for corrective actions.

ISO/IEC 17025:2017 - Laboratory Management System- Course Assessment

Learn about laboratory management systems laid out by the ISO 17025 international standard in this free online course.

ISO/IEC 17025:2017 - Laboratory Management Systems

This short course is designed for individuals and laboratories looking forward to their standardisation. We explain management standards defined by the ‘ISO/IEC 17025 general requirements for testing and calibration laboratories competence’ devised by ISO. This comprehensive course explains all the basic and essential requirements of the standard. It also provides a simplified clause-by-clause explanation of its four main sections.

Fundamentals of Pest Control

Pest Identification and Assessment

Non-Chemical Pest Control Methods

Chemical Pest Control Methods

This module will teach you the fundamentals of pest control, types of pests and their impact, pest life cycles and behavior, factors influencing pest infestations, pest identification and assessment, non-chemical pest control methods, genetic control and sterile insect, chemical pest control methods, and integrated pest management (IPM) approach.

Monitoring and Prevention

Sustainable Pest Management

Urban and Structural Pest Control

Topics you will learn in this module include but are not limited to pest monitoring techniques, preventive measures and exclusion strategies, ecological impact of pesticides, selective pesticide use and resistance management, organic and biodynamic pest management, pest management in residential areas, and commercial and industrial pest control.

Pest Control and Management - Assessment

This free online course teaches you how to use chemical and non-chemical pest control techniques to manage infestations.

Pest Control and Management

Pests make environments unhygienic and are a major cause of diseases, some of which may be lethal and difficult or expensive to cure. Effective pest management and control are necessary to keep a living and working environment free from health hazards. This course provides the knowledge and skills required to establish and maintain a successful pest control management programme and describes various pests, their life cycles and their behaviour.

Foundations of Construction Safety Management

Safety Management for Hazardous Environments

High-risk Site Activities and Demolition Safety

This module covers risk identification and mitigation in construction work and how to evaluate and manage risk in compliance with CDM regulations. You'll also learn how behaviour affects safety on construction sites, including safety measures for scaffolding, excavation, demolition and more.

Course Assessment - Site Management Safety Training Scheme (SMSTS)

Learn how to manage safety on construction sites in accordance with UK legal provisions in this free online course.

Site Management Safety Training Scheme (SMSTS)

Construction workers are often vulnerable to injuries and hazards so ensuring safety is maintained consistently is crucial for both site managers and workers. This course covers the essential knowledge needed for maintaining safety on construction sites. You'll learn to identify and assess risks while adhering to UK industry regulations. In addition, we'll discuss safety measures to take during erecting scaffolding, excavations and demolitions.

Introduction to Hot Work

Classification of Hot Work Areas

Roles and Responsibilities

Hot Work Permit

Hot Work Risk Assessment

Essential Safety Precautions

This module will familiarize you with hot work processes, including their potential hazards and safety precautions. You'll learn how to assess the risks associated with hot work and determine appropriate control measures. You'll also understand the hot work permit system and the roles & responsibilities of those involved in the permitting process.

Hot Work Safety - Course Assessment

Learn how to manage the hazards associated with hot work processes in this free online health and safety course.

Hot Work Safety

This hot work safety training equips you with the essential knowledge to recognize and mitigate hot work hazards. You'll understand the hot work risk assessment process and hierarchy of controls for effectively reducing risks. The course explains the hot work permit system along with the roles and responsibilities of those involved in the permitting process. You'll also gain a clear understanding of hot work permitted and prohibited areas.

Introduction to Traffic Marshalling

Traffic Management

Temporary Traffic Control

Traffic Risk Assessment

Vehicle Signaling

Reversing Vehicles

Health and Safety

In this module, we will look at the fundamental objectives of traffic marshalling and the general duties of a traffic marshal. A traffic marshal's responsibilities when controlling traffic on a highway or construction areas shall be examined. Assessing risks along with health and safety concerns of traffic near construction areas will be assessed.

Construction Safety: Traffic Marshalling - Course assessment

Train as a traffic marshal or bankman who provides traffic management on construction sites in this free online course.

Construction Safety: Traffic Marshalling

This course takes an in-depth look at the role of traffic marshals on construction sites. Traffic management is important to maintaining health and safety as the presence of heavy machinery and large vehicles creates a need for the efficient direction of traffic. Traffic management in such a busy area faces hazards and safety risks, which we identify in this course. Sign up to train as a traffic marshal or bankman and add a skill to your CV.

Introduction to the AS Standards

Organization's Context and Leadership

QMS Planning and Support

This module introduces students to the AS standards for suppliers of the aviation industry. It explains the importance of regulations in the aerospace industry and navigates them through the journey of different AS standards. It also explains the requirements of Clauses 4, 5, 6, and 7 of this standard.

Organizational Operations

Operations and Evaluation

Organizational Improvement

This module explains the requirements of Clauses 8, 9, and 10 of AS9100D. These requirements are regarding organizational operations, evaluation, and continuous improvement of the organizational operations.

AS9100D Quality Management System (QMS) for Aerospace Industry - Course Assessment

Learn the requirements of AS9100D for the developers and suppliers of components for the aerospace & defense industries.

AS9100D Quality Management System (QMS) for Aerospace Industry

This course explains different clauses and their various requirements for the organizations that develop, design, or supply parts, components, and assemblies concerned with the aerospace and defense industries. After enrolling, the students will be able to navigate the differences between the different versions of the AS standards. Moreover, they will also get a simple and straightforward explanation of this standard's requirements.

Introduction to Hazardous Materials Handling - Learning Outcomes

Understanding Hazardous Materials

Legal and Regulatory Compliance

Importance of Hazard Communication

Risk Assessment and Management

Personal Protective Equipment (PPE) for Hazardous Materials Handling

Introduction to Hazardous Materials Handling - Lesson Summary

In this module, participants will have a solid foundation in understanding hazardous materials, legal and regulatory compliance, hazard communication, risk assessment, and the proper use of personal protective equipment. This knowledge is essential for creating a safe and compliant working environment in industries dealing with hazardous materials.

Hazardous Materials Storage and Transportation - Learning Outcomes

Proper Storage Practices for Hazardous Materials

Managing Segregation and Compatibility of Hazardous Materials

Emergency Preparedness for Hazardous Materials Storage

Transportation Regulations

Handling Hazardous Materials in Transit

Emergency Response Planning

Case Studies and Lessons Learned

Hazardous Materials Storage and Transportation - Lessons Summary

This module covers storing hazardous materials, segregation and compatibility, and developing emergency response plans. Learn DOT regulations, proper labelling, packaging, and security measures for transportation, best practices for loading/unloading and case studies.

Advanced Hazardous Materials Handling Techniques - Learning Outcomes

Decontamination Procedures

Confined Space Entry Protocols

Managing Hazardous Waste

Best Practices for Chemical Spill Response

Continuous Improvement in Hazardous Materials Handling

Advanced Hazardous Materials Handling Techniques - Lesson Summary

This module covers decontamination techniques to ensure health, safety, and regulatory compliance. Learn to manage decontamination zones, handle confined space hazards, and apply physical, chemical, thermal, and radiological decontamination. Develop skills in PPE selection, emergency response planning, and environmental protection.

Hazardous Materials Handling Mastery - Course Assessment

Gain expertise, ensure safety, and excel in hazardous materials handling with this comprehensive free online course.

Hazardous Materials Safety Specialist

This course covers the classification, legal compliance, and risk assessment of hazardous materials. It delves into communication standards, PPE usage, and storage guidelines. Transportation regulations and emergency response planning are also covered. Advanced techniques include decontamination, confined space entry, hazardous waste management, chemical spill response, and continuous improvement through safety audits and case studies.